manualshive.com logo in svg

SVAT CV502-4CH, Quick Start Manual, Page: 14 / 21

Share
Download
SVAT CV502-4CH Quick Start Manual Download Page 14

CV502-4CH

14  

SVAT ELECTRONICS

now you can see

NETWORKING GUIDE

TESTING PORT FORWARDING

If you would like to see if your port forwarding worked and that you can view 

your DVR remotely, follow these steps : 
1.  Open a web browser and type in www.whatsmyip.org.  
2.  Your External IP address will be listed on the top center of the screen, 

make sure to write it down. This is the address that you can use when not 

at home to connect up to your DVR.

3.  Open another web browser.
4.  Type in www.canyouseeme.org. This also allows you to see your external 

IP address. 

5.  Your external IP address will be listed and underneath it you will see a 

box saying “what port?” 

6.  In the box insert the port number you set the DVR to. The default ports 

are 80 and 9000 (you have to forward both, please make sure you check  

both ports.) 

7.  Click the “Check” button and scroll down.  
8.  You will see a message that tells you that it can successfully see your port. 

This means you have successfully completed the port forwarding. 

9.  If you receive an error message please view  “IF YOU CANNOT CONNECT” on 

Pg. 59 of the manual. If you’re still having trouble you can always contact 

SVAT’s 24/7 support team.

Write down your external IP address

Type in the port number(s) you forwarded 

Note: www.whatsmyip.org and www.canyouseeme.org are not affiliated with SVAT in any way.  

Summary of Contents for CV502-4CH






















Reviews:

No comments