SVAT ELECTRONICS
now you can see
CLEARVU11
8
POWERING THE SYSTEM
1. Insert the power supply wire
into the rear DC 12V Port on the
LCD/DVR.
2. Plug the mouse into the PS2
port at the back of the LCD/DVR
(recommended).
3. Insert the power cord into the
power supply.
4. Plug the power cord into a
power outlet.
5. Turn on the master switch on
the back right of the system.
6. Press POWER on the top panel
of the system if it doesn’t start
after turning on the master
switch.
NOTE:
We recommend using a surge protected power bar and/or
Uninterrupted Power Supply (UPS) backup to prevent damage
to your DVR system.
BASIC SETUP
