4 Operation
4.1 Front panel layout
1
－
STICK/LIFT TIG switch key
2
－
Multifunctional data display
3
－
Multifunctional data adjusting knob(coarse adjustment by pressing the knob and turning it:
big regulating rate and high speed; fine adjustment only by turning the knob: small
regulating rate and low speed)
4.2 Operation Instruction
The starting up display
Switch on the welding power source, the front panel displays as Chart 1. After
the
【
Multifunctional data display
】
(or any key or knob on front panel) flashes for 5 seconds, the
machine enters into the welding mode that saved in the last shutdown.
Chart 1: the starting-up display interface
12
