SV 102 USER GUIDE
© SVANTEK
10
MAKING A SIMPLE MEASUREMENT & USING DISPLAY OPTIONS
MAKING A SIMPLE MEASUREMENT & USING DISPLAY OPTIONS
MAKING A SIMPLE MEASUREMENT & USING DISPLAY OPTIONS
MAKING A SIMPLE MEASUREMENT & USING DISPLAY OPTIONS
Press
+
push-buttons till you see main view.
If the logger function is used, make sure you have enough
free memory to save measurement results.
Press
+
to Start and to Stop a measurement.
During the measurement you cannot change the settings.
The set of results you may obtain in dosimeter mode is as
follows:
DOSE
(%),
D_8h
(%),
LEPd
(dB),
LAV
(dB),
LEQ
(dB),
PEAK
(dB),
MAX
(dB),
E
(Pa
2
h),
SEL
(dB),
E_8h
(Pa
2
h),
SEL8
(dB),
PSEL
(dB),
PCTC
(-),
PCTP
(%),
RMS
(dB) (for SLM the following results are available
SPL
,
LEQ
,
SEL
,
Lden
,
LEPd
,
Ltm3
,
Ltm5
,
Lxx
,
OVL
,
PEAK
,
MAX
,
MIN
).
You can see main measurement results by pressing right
and left
push-buttons. You can switch between
views of available measurement results (measurement
function and mode dependently: main results from left
channel, main results from right channel, 3-profiles view
from left channel, 3-profiles view from right channel,
dosimeter results, statistics for left channel, statistics for
right channel, 1/1 OCTAVE spectrum for left and for right
channel) by pressing
+
(UP) or
+
(DOWN)
push-buttons.
In 3-profiles view, active profile is changed after
pressing
.
Display
options
in
simplified
version
(for SINGLE CHANNEL mode, DOSIMETER & 1/1 OCTAVE
function) are presented below.