It’s not necessary to discharge the condensed water
to the tank, it can also be drained out directly by
change drainpipe as follow steps
：
Pull out the water pipe by means of the arrow
direction, then install the drainpipe.
Such as the piles can be used if it is difficult to do.
Caution!
Before use the machine, the packaging foam
must be removed from the drum.
1. Open the loading door.
2. Pull off adhesive strips on top of drum from
inside machine.
3. Remove the two-packaging foam from the
machine from inside machine.
Check across the corner:
⚫
When press on the edge, the machine should not
shake up and down. (please check two direction)
when press on the top frame (across the corner),
the dryer shakes, need tore-adjust the adjustable feet.
⚫
Do not put stacks of blanket or a rope on the floor, which could
generate some heat and affect the machine running.
IMPORTANT:
The hot air emitted by the tumble dryer can reach
temperature of up to 60°C.The appliance must therefore not be installed
on floors which are not resistant to high temperatures.
To make it easier to load or unload the laundry the door can be reversed. This
operation must be carried out by qualified personnel. Please contact the nearest
our service center.
Water Discharge
Removing Transport Safety Packaging Foam
Two Packing Foams
Door Reversal
