⚫
Filter light " ", It comes on every cycle to remind you that the filter
must be cleaned at the end of the program.
⚫
Child Lock light " ", this light indicates the appliance is locked.
⚫
Buzzer light " ", this light is on when buzzer function is selected,
Buzzer function is default.
⚫
Delay Start light " ", this light is on when delay start program is
selected.
⚫
Dry Level light " ", these lights will be on when Dry Level
function is selected. When you choose different drying intensities, the
corresponding indicator light turns on.
⚫
Tank full light " ", It comes on after each program and also when the
water tank is full, which remind you to empty the water container.
In order to prevent condensate overflow, the machine will be suspended
when the water tank is full. Note! Please empty the water container after
each program to avoid the alarm when use in next time.
All drying programs end with 10 minutes cooling phase. If the laundry
is not removed at the end of the cycle, the dryer runs anti crease phase
(default: 30 minutes, select: 120 minutes). If you do not remove the
laundry, the dryer will stop automatically at
the end of the anti-crease
phase. The display shows “End” and the buzzer sounds for 15 seconds
when the buzzer function is on. To finish, turn the program selector dial to off.
When the machine is on, press “Time” and “Dry level” button for several
seconds at the meantime, the system will lock all the buttons. Then all buttons
are invalid except “off”. If you want to make the appliance to return to the
normal state ,then press “Time
”
and “Dry level” button for several seconds
meantime again.
The function will be released in the following cases:
⚫
Open the door during operation
⚫
Take out filter drawer during operation
⚫
Water tank full
You can set again the “Child Lock” function when you
restart the machine.
At the End Of The Program
“Child Lock” Function
