EN - 25
8.2 Spray Arms
Make sure that the spray holes are not
clogged and that no food waste or foreign
object is stuck to the spray arms. If there is
any clogging,remove the spray arms and
clean them under water. To remove the
upper spray arm undo the nut holding it in
position by turning it clockwise and pulling
it downwards. Make sure that the nut is
properly tightened when refitting the upper
spray arm.
8.3 Drain Pump
Large food residues or foreign objects which
were not captured by the filters may block
the waste water pump. The rinsing water will
then be above the filter.
Warning Risk of cuts!
When cleaning the waste water pump,
ensure that you do not injure yourself on p
ieces of broken glass or pointed
implements.
In this case:
1.
First always disconnect the appliance
from the power supply.
2.
Take out baskets.
3.
Remove the filters.
4.
Scoop out water, use a sponge if requi
-
red.
5.
Check the area and remove any foreign
objects.
6.
Install filters.
7.
Re-insert baskets.