EN - 14
4.4 Test Strip
Run water through
the tap (1min.)
Keep the strip in
the water (1sec)
Shake the strip.
Wait (1min.)
Set the hardness level of
your machine.
1
2
3
4
5
6
1
munite
1
second
1
munite
NOTE:
The factory hardness level setting is “3”. If the water is well water or has a hardness
level above 90 dF, we recommend that you use filter and refinement devices.
4.5 Water Hardness Table
Level
German dH
French dF
British dE
Indicator
1
0-5
0-9
0-6
P1-9h LEDs are on.
2
6-11
10-20
7-14
P2-9h LEDs are on.
3
12-17
21-30
15-21
1/2-9h LEDs are on.
4
18-22
31-40
22-28
3h-9h LEDs are on.
5
23-31
41-55
29-39
6h-9h LEDs are on.
6
32-50
56-90
40-63
P1-6h-9h LEDs are on.
4.6 Water Softener System
The dishwasher is equipped with a water softener which reduces the hardness in the
mains water supply. To find out the hardness level of your tap water, contact your water
company or use a test strip (if available).
4.7 Setting
In order to change the salt level, follow the below steps:
• Open the door of the machine.
• Turn on the machine, and press the Programme button as soon as the machine is
turned on.
• Hold down the Programme button until all leds blink once.
• The machine will display the last setting.
• Set the level by pressing the Programme button.
• Switch off the machine to save the setting.