Use a vacuum cleaner to remove dust accumulations from the filter. If it is very dirty, immerse in warm
water and rinse a number of times. The water should never be hotter than 40
℃
(104
℉
). After washing,
leave the filter to dry then attach the intake grille to the appliance.
START-END OF SEASON OPERATIONS
START OF SEASON CHECKS
Make sure the power cable and plug are undamaged and the earth system is efficient.
Follow the installation instructions precisely.
END OF SEASON OPERATIONS
To empty the internal circuit completely of water,
remove the cap(fig. 32).
Run off all water left into a basin. When all the water
has been drained, put the cap back in place.
Clean the filter and dry thoroughly before putting back.
TECHNICAL SPECIFICATIONS
Mains voltage see rating label
Maximum power in cooling mode - -
Refrigerant - -
Cooling capacity - -
Strictest operation environment:
Cooling mode: 18
℃
-
35
℃
(64
℉
-
95
℉
) , 30%RH~90%RH
Heating mode: 10
℃
-
25
℃
(50
℉
-
77
℉
), 30%RH~90%RH
