1 .Extend either side of the hose (Fig.1)and screw
the hose inlet (Fig.2).
2 .Extend the other side of the hose and screw it to the
hose outlet (Fig.3).
3 .Install the hose inlet into the unit (Fig.4).
4 .Affix the hose outlet into the window slider kit
and seal. (Fig.5 &6).
Your window slider kit has been designed to fit most standard vertical and horizontal window
applications,however, it may be necessary for you to modify some aspects of the installation
procedures for certain types of windows. The window slider kit can be fastened with screws.
NOTE: If the window opening is less than the minimum length of the window slider kit, cut the end without
the hold in it short enough to fit in the window opening. Never cut out the hole in window slider kit.
