Suzuki SWIFT RS415 2017, Service Manual

Page: 754 / 1257

5C-8 Clutch:
Clutch Cover, Clutch Disc and Flywheel Components
S4RS0A5306014
Clutch Cover, Clutch Disc and Flywheel
Removal and Installation
S4RS0A5306015
Removal
1) Dismount manual transaxle assembly referring to
“Manual Transaxle Unit Dismounting and
Remounting: in Section 5B”.
2) Hold flywheel with special tool and remove clutch
cover bolts (1), clutch cover (2) and clutch disc.
Special tool
(A): 09924–17810
3) Pull out input shaft bearing (1) from flywheel (2), use
the following special tool if necessary.
Special tool
(A): 09921–26020
(B): 09930-30104
(a)
(b)
(b)
A
A
A
12
11
5
6
A
3
A
4
7
10
2
9
8
1
I4RS0A530013-
1. Flywheel 9. Clutch disc
2. Flywheel bolt 10. Clutch cover bolt
3. Clutch release shaft seal
: Apply grease 99000-25010 to seal lip. (0.3 g (0.01 oz))
11. Release arm
4. Clutch release shaft No.2 bush
: Apply grease 99000-25010 to bush inside. (0.3 g (0.01 oz))
12. Release arm bolt
5. Clutch release shaft
: Apply grease 99000-25010 to the end of release shaft arm. (0.3 g (0.01 oz))
: 70 N
˜
m (7.0 kg-m, 51.0 lb-ft)
6. Clutch release shaft No.1 bush
: Apply grease 99000-25010 to bush inside. (0.3 g (0.01 oz))
: 23 N
˜
m (2.3 kg-m, 17.0 lb-ft)
7. Release bearing
: Apply grease 99000-25010 to joint of bearing and release shaft and also bearing inside. (0.3 g (0.01 oz))
Do not reuse.
8. Clutch cover
I4RS0A530014-
I2RH01530023-