
10
ATTACH THE PIANO TO THE STAND
1.
Place the piano on the stand. Align the circular holes on
the side board brackets with the holes on the body. Insert
the M6X30 screws into the holes and fasten. Note: Do
not tighten the screws until all screws have been inserted.
2.
Plug the AC power cord into the “DC 12V” jack, located on
the left side of the keyboard.
PLACE THE
PIANO ON THE
STAND AND
PLUG IN
TURN THE POWER
ON, ADJUST THE
VOLUME AND
BEGIN TO PLAY
1.
TURN THE POWER SWITCH ON
- Turn on the power switch
located on the left side of the keyboard ( is off, and is on).
The display will welcome you and set the voice to Grand Piano
automatically. The display will show “001: Grand Piano”.
Please note
, when your turn the power off, do not turn the
power back on immediately. Wait at least five seconds to turn
the power back on so that the circuit can properly reset.
2.
SET THE VOLUME TO THE DESIRED SETTING -
Adjust the
volume control to a comfortable level by sliding the Master
Volume control left, for softer sound or right, for louder sound.
3.
BEGIN TO PLAY!
POWER
MASTER VOLUME
MIN MAX
DC 12V
3
4
ASSEMBLY
Summary of Contents for SS-100
Page 1: ...1 SUZUKI Pianos SS 100 DIGITAL PIANO OWNER S MANUAL SUZUKI ...
Page 2: ...2 ...
Page 59: ...59 ...