Suzuki RA410, Manual

Page: 669 / 761

INSTRUMENTATION AND DRIVER INFORMA-
TION
INSTRUMENT PANEL
REMOVAL
1) Disconnect negative cable at battery.
2) Disable air bag system, if equipped. Refer to “Disable Air Bag
System” in Section 10B.
3) Remove steering column hole cover, glove box and hood latch
release lever.
4) Remove steering column assembly. Refer to Section 3C.
5) Disconnect heater control cables (1).
6) Disconnect wire harness couplers (2).
7) Remove speaker covers (5), front piller trims (3), dash side
trims (4) and bolt cover (6).
8) Remove air bag harness from instrument pannel section, if
equipped. Refer to Section 10B.
9) Remove ground wire from dash side.
10) Remove instrument pannel mounting bolts (7).
11) Remove instrument pannel (8).
WARNING:
See WARNING at the beginning of this section.
2
1
3
5
6
4
5
7
7
8
7
INSTALLATION
1) Install instrument panel by reversing procedure, noting the fol-
lowing items.
When installing each part, be careful not to catch any cable
or wiring harness.
When installing column assembly, refer to Section 3C.
2) Adjust control cables. Refer to Section 1A.
3) Enable air bag system if equipped. Refer to Section 10B.
BODY SERVICE 9-27