7
FRONT
AVANT
FRONT
AVANT
#
A: Front brake cable
B: Throttle cable
C: Left switch wiring harness
HANDLEBAR PAD
Install the handlebar pad to the handlebar reinforcing
bar.
A: Handlebar pad
B: Strap L:145 mm
C: “SUZUKI” logo
Lift the rear of the vehicle with a hoist, then raise the
vehicle front and pull the crate base rearwards.
Place a wooden block or the like under the frame.
REAR WHEEL
When installing the rear wheels onto the axles, spe-
cial attention must be paid to the arrow of the rota-
tional direction on the tire sidewall. When the tires are
properly installed, the arrows must indicate forward
rotation of the wheels.
The line drawings on page 33 and 34 show the
proper routing of the control cables and wir-
ing. Refer to drawings in addition to following
the instructions carefully.
NOTE:
Cut the strap as shown in the photograph.
The “SUZUKI” logo should face the backward.
