10
Properly position the wheel on the axle stud bolts.
Temporarily finger-tighten the wheel set nuts.
A: Stud bolt
B: Air valve
C: Washer OD:20.0 mm ID:10.5 mm
D: 10 mm flange nut (Wheel set nut)
Remove the hoist used to lift the vehicle and then
place the vehicle in place.
Tighten the wheel set nuts to the specified torque.
"
Wheel set nut: 55 N·m (5.5 kgf-m)
A: 10 mm flange nut (Wheel set nut)
STEERING HEAD COVER
Align the recess of steering head cover on the handle-
bars.
Fix the steering head cover by push down firmly.
A: Steering head cover
B: Handlebars
C: Recess
FRONT GRIP
Install the front grip on the frame using four bolts.
A: Front grip
B: Frame
C: 8 × 16 mm flange bolt
NOTE:
Be sure to install the front wheels with the air
valves facing outwards.
