DRIVE TRAIN 4-37
INSPECTION
REAR PROPELLER SHAFT
Inspect the rear propeller shaft for wear or damage.
If any wear or damage is found, replace it with a new one.
UNIVERSAL JOINT
Inspect the universal joint and outer surface of the bearing for
scuffing, wear and damage. If any defects are found, replace the
bearings and universal joint as a set.
Insert the universal joint to the bearing and check the play by
turning the universal joint, as shown. If excessive play is noted,
replace the bearing with a new one.
SHAFT BOOT
Inspect the joint shaft boot
1
and propeller shaft boot
2
for
wear or damage.
If any wear or damage is found, replace it with a new one.
REAR PROPELLER SHAFT SPRING
Inspect the rear propeller shaft spring for wear or damage.
If any wear or damage is found, replace it with a new one.
Summary of Contents for LT-A700X 2004
