Suzuki LT-A400, Service Manual

Page: 270 / 502

3A-9 Drive Chain / Drive Train / Drive Shaft:
• Install the trailer towing (1) and tighten the rear axle
housing bolts (2) to the specified torque.
Tightening torque
Rear axle housing mounting bolt (Final gear case)
(a): 55 N·m (5.5 kgf-m, 40.0 lb-ft)
• Tighten the rear axle housing mounting nuts (3) to the
specified torque.
Tightening torque
Rear axle housing mounting nut (swingarm) (b):
60 N·m (6.0 kgf-m, 43.5 lb-ft)
Rear Axle / Axle Housing Inspection
B827H13106011
Rear Axle Shaft
Inspect the rear axle shaft for distortion or damages. If
any damages are found, replace the rear axle shaft with
a new one.
Rear Axle Housing
Inspect the rear axle housing for distortion or damages.
If any damages are found, replace the rear axle housing
with a new one.
Dust seal (LH Only)
Inspect the dust seal lip for wear or damage. If any
damages are found, replace the dust seal with a new
one.
Hub Bearing
Inspect the inner race play of the hub bearing by hand
while it is in the rear axle housing.
Rotate the inner race by hand to inspect for abnormal
noise and smooth rotation. If there is anything unusual,
replace the bearing with a new one.
NOTE
Make sure to check each bearing in the same
manner.
1
(a)
2
(a)
2
(b)
3
(b)
3
I827H1310014-01
I827H1310010-01
“a”: Play
I827H1310011-01
I827H1310015-01
“ a ”
“ a ”
I831G1510087-01