Suzuki GSX1250FA, Owner'S Manual

Page: 20 / 135

2-8
If the tachometer needle does not
point to zero, follow the procedure
below to reset the tachometer.
1. Press and hold the ADJ button
2
and turn on the ignition switch.
2. Hold the ADJ button
2
for 3 – 5
seconds.
3. Release the ADJ button
2
. Rap
the ADJ button twice.
NOTE: Reset procedure, from step 1
to step 3, should be performed within
10 seconds.
NEUTRAL INDICATOR LIGHT “N”
1
The green light will come on when the
transmission is in neutral. The light
will go out when you shift into any
gear other than neutral.
TURN SIGNAL INDICATOR LIGHT
“

”
3
When the turn signals are being oper-
ated either to the right or to the left,
the indicator light will blink intermit-
tently.
NOTE: If a turn signal light is not
operating properly due to bulb fila-
ment or circuit failure, the indicator
light blinks more quickly to notify the
rider of the existence of a problem.
TACHOMETER
4
The tachometer indicates the engine
speed in revolutions per minute (r/min).
GEAR POSITION INDICATOR
5
The gear position indicator indicates
gear position. This indicator displays
“0” when the transmission is in neu-
tral.
NOTE: When the display indicates
“CHEC”, the gear position indicator
does not indicate a number but indi-
cates “–”.
FI
SEL