Suzuki DL1000A 2018, Manual

Page: 29 / 161

3-12
When the display indicates
“CHEC” in the odometer display
area, check the following items;
•
Make sure that the engine stop
switch is in the “

” position.
• Make sure that the transmis-
sion is in neutral or the side
stand is fully up.
If the display still indicates
“CHEC” after checking the above
items, inspect the ignition fuse
and the connection of the lead
wire couplers.
Gear Position Indicator
8
The gear position indicator indi-
cates gear position. This indica-
tor displays “N” when the
transmission is in neutral.
NOTE: When the display indi-
cates “CHEC” in the odometer
display area, the gear position
indicator does not indicate a num-
ber but indicates “–”.
Speedometer
9
The speedometer indicates the
road speed in kilometers per hour
or miles per hour.
NOTE:
•
Set the meter
J
to odometer,
then press and hold the
ADJUST button
1
for 2 sec-
onds to switch between km/h
and mph. At the same time,
the odometer will be changed
between km and mile.
• Select km/h or mph, as appro-
priate, to comply with traffic
regulations.
• Check km/h and mph display
after adjusting the instrument
panel display.
H
GEAR
C
E F
mph
TRIP
RANGE
ADJ
MPG
km/L/100km
V
AVG
AIR
1 2
1
OFF
TC
2
1 2
km/h
2
11
1000 r/min
12 10
0
3
4
5
6
7
8
9
1