42
STATION SETTING TROLL MODE
CAUTION SYSTEM
This system is activated when the TROLL mode
operation is started on the gauge screen of the
cockpit, where the TROLL Mode operation is
not available.
If this system activates, the “Check Station Set-
ting” is displayed on screen.
Identify the cockpit where the SELECT LED
1
on the remote control box is turned ON and per-
form the TROLL Mode operation from the
gauge screen of that cockpit where the
SELECT LED is turned ON.
On the gauge screen where the TROLL Mode
operation is available,
is displayed.
The “Check Station Setting” indication clears
when any of the button is pressed in the gauge.
THROTTLE
ONLY
SELECT
TROLL CONDITION CAUTION SYSTEM
This system activates when the mode cannot
be transferred to the TROLL Mode.
If this system activates, the “Check Troll Condi-
tion” is displayed on screen.
Make sure that the remote control lever has
been shifted into forward or reverse and the
engine throttle has been fully closed.
Refer to the Setting the Troll Mode section.
The “Check Troll Condition” indication clears
when any of the button is pressed in the gauge.
TROLL SYSTEM CAUTION SYSTEM
The current ECM and BCM of your outboard
motor does not applicable to the troll mode sys-
tem.
If this system activates, the “Check Troll Sys-
tem” is displayed on screen.
The “Check Troll System” indication clears
when any of the button is pressed in the gauge.
If this system activates, consult your authorized
Suzuki Maine Dealer.