24
BUTTON FUNCTIONS
The multi-function gauge has four buttons:
[MENU], [
], [
], and [SET].
The function of each button is as follows.
The [MENU] button gives you access to the
menu screen.
NOTE:
Pressing and holding the [MENU] button can
transfer the mode to the TROLL mode.
Use the [
] and [
] buttons to move the
selection cursor, select sub information, and
adjust information input.
NOTE:
Press and hold either the [
] or [
] button to
reset the trip time, trip distance, average fuel
consumption, and total fuel consumption in the
sub information simultaneously.
The [SET] button is used to decide the select-
able item.
NOTE:
Pressing and holding the [SET] button, can
change the illumination for the gauge screen to
that for the daytime or nighttime.
P
M
P
M
Day
Night
SCREEN SELECTION
The multi-function gauge can select the display
screen from the following choices.
• Engine Speed
• Ground Speed/Fuel Information
• Fuel Information
• All Items Display Screen (Full Item)
To select the display screen:
Press the [SET] button and select the desired
display screen.
Every time the [SET] button is pressed, the dis-
play screen switches in the following sequence.
NOTE:
Screens that had been set to “OFF” in the dis-
play setting are not displayed and the display
skips to the next screen. (Refer to the MENU
INFORMATION SELECTION section)
1. Engine Speed Display Screen
The engine speed
1
, shift position
2
, trim
position
3
, time
4
, engine position
5
and
sub information
6
are displayed.
The sub information display can be switched
by pressing the [
] or [
] buttons.
This screen can be selected between digital
and analog display. (Refer to the MENU
INFORMATION SELECTION section)
Engine Speed Display Screen
Speed/Fuel Information Display
Screen
Fuel Information Display Screen
All Items Display Screen