Suzuki DF25 2006, Rigging Manual, Page: 15 / 45

2-6 MOTOR DIMENSIONS
CODE DEFINITION
Code Definition and Description
A1
Minimum angle from transom board and bracket clamp (transom angle)
Note: ABYC recommends boat transom angle be 14° ± 2°
A2 Maximum tilt-up angle
A3 Maximum steering angle on STBD side from centerline of motor body
A4 Maximum steering angle on PORT side from centerline of motor body
W1 Distance from centerline to the outermost end of the outboard motor on STBD side
W2 Distance from centerline to the outermost end of the outboard motor on PORT side
W3
Distance from centerline to the farthest point on the body when steered to the maximum
angle on STBD side
W4
Distance from centerline to the farthest point on the body when steered to the maximum
angle on PORT side
H1 Overall height
H2 Vertical distance from Transom height (datum point to cavitation plate undersurface)
H3 Vertical distance from datum point to highest point of engine with cover installed
H4
Vertical distance measured from the datum plane to the outermost radius of the engine when
tilted up and locked
H5 Distance from datum point to bracket clamp lowest end
L1 Horizontal distance from datum point to rearmost point of engine cover
L2 Horizontal distance from datum point to the front end of steering bracket
L3
Distance from datum point to the front end of tiller handle, when the handle is in horizontal
position
L4 Horizontal distance from datum point to rearmost point when motor is in tilted up position
L5 Horizontal distance from datum point to the front end when motor is in tilted up position
15 15