manualshive.com logo in svg

Suzuki Carry Pro, Manual

Share
Download
Suzuki Carry Pro Manual Download Page 196

7-11

EMERGENCY SERVICE

52SS0-01E

Engine Trouble: Starter Does 
Not Operate

1) Try turning the ignition switch to

“START” position with the headlights

turned on to determine the battery con-

dition. If the headlights go excessively

dim or go off, it usually means that

either the battery is discharged or the

battery terminal contact is poor.

Recharge the battery or correct battery

terminal contact as necessary.

2) If the headlights remain bright, check

the fuses. If the reason for failure of the

starter is not obvious, there may be a

major electrical problem. Have the vehi-

cle inspected by a SUZUKI dealer or a

qualified workshop.

Engine Trouble: Does Not 
Start

Make sure that your vehicle has enough

fuel and battery.

If the engine does not start under very cold

condition, press the accelerator pedal all

the way to the floor and hold it while crank-

ing the engine.

Refer to “Starting the Engine” in OPERAT-

ING YOUR VEHICLE section.

If the engine still does not start, have your

vehicle inspected at a SUZUKI dealer or a

qualified workshop.

• Do not operate the starter motor for

more than 12 seconds.

NOTICE

The steering column is not strong

enough to withstand shocks trans-

mitted from the front wheels during

towing. Always unlock the steering

wheel before towing.

Summary of Contents for Carry Pro

















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands