Suzuki Carry Pro Manual Download

Page: 118 / 240

5-27

OTHER CONTROLS AND EQUIPMENT

52SS0-01E

Menu Item

Description

“LOUDNESS”

“OFF”, “LOW”, “MID”, “HI”

Compensate for clear sound at low volume.

“BASS BOOST”

“0” to “+6”

Select the bass boost level.

“HPF SETTING”

Cut-off frequency: “OFF”, “50HZ”,

“63HZ”, “80HZ”, “100HZ”, “125HZ”,

“160HZ”, “200HZ”

Slope level: “–12”, “–24”

Only frequencies higher than the high-pass filter (HPF) cutoff are output from the

speakers.

“SLA”

“+4” to “–4”

Adjust the volume level for each source except FM.

Each of the below combinations are set to the same setting automatically.

• USB, iPod, ANDROID, SPOTIFY, and APP (iPhone)

Summary of Contents for Carry Pro

















































































































































































































































Search results

Summary of Contents for Carry Pro

Reviews:

Related manuals for Carry Pro

Brands by name

Popular brands

Suzuki Carry Pro, Manual

Search results

Summary of Contents for Carry Pro

Reviews:

Related manuals for Carry Pro

Brands by name

Popular brands