Suzuki Alto800, Manual

Page: 24 / 190

2-5
BEFORE DRIVING
53MH0-74E
Keyless Entry System (if
equipped)
53M-04-010
Keyless Entry
You can lock / unlock all doors simultane-
ously by operating the transmitter near the
vehicle.
• To lock all doors, press “LOCK” button
once. All indicator lights will flash once
when doors are locked.
• To unlock all doors, press “UNLOCK”
button once. All indicator lights will flash
twice when doors are unlocked.
NOTE:
• The operating distance of the keyless
entry system transmitter is about 20
meters, but this may vary depending on
the condition of transmitter’s battery and
surroundings especially near other
transmitting devices such as radio tow-
ers.
• The door locks cannot be operated with
the transmitter if the ignition key is
inserted in the key cylinder or if any door
is open.
• Be sure to close the doors and windows
before locking.
• If you lose any of the transmitters (keys),
contact your MARUTI SUZUKI autho-
rised dealer as soon as possible for
erasing the transmitter ID from vehicle
controller memory. In case you need a
new transmitter, place an order with your
dealer.
• Key cylinder mentioned in this section is
the key hole mounted on steering col-
umn, where key is inserted to start the
vehicle.
GENERAL FEATURES
Illuminated Entry
When vehicle is unlocked, the room lamp
will turn ON to facilitate illuminated entry
into the vehicle. The room lamp will turn
OFF when the door is closed.
Illuminated Exit
When door is opened to exit the vehicle,
the room lamp will turn ON and will turn
OFF when the door is closed.
Auto Relock
In case of accidental Unlock/Disarm of
vehicle by Key, vehicle will automatically
Lock within 30 sec. without any indication.
Auto relock cycle gets canceled if user
does any of the following operation within
30 sec:
1. Open any door.
2. Insert key in cylinder.
3. Any door is locked/unlocked by door
knob.
Radio Frequency Lock Out
Key Lock/Unlock/Panic will cease to func-
tion when Key is inside Key cylinder.
EXAMPLE
NOTICE
The transmitter is a sensitive elec-
tronic instrument. To avoid damaging
the transmitter:
• Do not expose it to impacts, mois-
ture, dust or high temperature such
as leaving it on the dashboard
under direct sunlight.
• Do not tamper with internal parts.
• Keep the transmitter away from
magnetic objects such as a televi-
sion.