Suzuki Alto800, Manual

Page: 118 / 190

5-25
OTHER CONTROLS AND EQUIPMENT
53MH0-74E
• As the number of folders recorded on the
disc increases, the time to read the disc
information also increases.
Limitations of displayed
information
• The unit only displays the folder and file
• name.
• Only one-byte alphanumeric characters
and symbols can be displayed. If 2-byte
characters can be displayed, they will
display as 1 character. If 2-byte charac-
ter display is not possible, a “*” will be
displayed.
• When playing MP3/WMA/AAC file, the
playback time may not be displayed
properly.
CAUTION
• The playback order may differ
depending on the writing software.
• Make sure to finalize the disc
before using on the unit.
• When naming an MP3/WMA/AAC
file, make sure to attach the exten-
sion “.mp3/.wma/.m4a” to the file
name.
• Do not attach the extension “.mp3/
.wma/.m4a” to files other than MP3/
WMA/AAC files. If a disc with such
a file is played, it will be mistakenly
recognized and it may cause
excessive noise to be emitted,
damaging the speaker.
• The unit may not be able to play
certain discs depending on disc
conditions, recording software or
the recorder used for writing the
data. In such cases, refer to the
instruction manual of the equip-
ment used.
• The unit is compatible with multi-
session recorded discs. However,
be sure to properly close the ses-
sion. Disc with a session that has
not been closed cannot be played
properly. When a disc is initially
inserted, some time will be
required for reading the data before
play can begin.