Suzuki 57100-2181 Series, Installation Instructions Manual

Page: 10 / 118

GENUINE SUZUKI ACCESSORIES
10/20
6. Reinstall the balancer assembly
that was removed step 1, and
tighten the bolt to fix the han-
dlebar balancer.
Tightening torque
Bolt: 5.5 N·m (0.55 kgf-m, 4.0
lbf-ft)

WARNING
Use an appropriate grip
cement, and dry well the
applied part, then check if it is
securely adhered.
If it has not completely dried or
if a different cement is used,
there would be a risk of the
grip slipping off during the rid-
ing. Verify that the grip is
securely mounted to the han-
dlebars before operating the
vehicle.
Handlebar
balancer
Bolt