Suzuki 57100-0682 Series, Installation Instructions Manual, Page: 9 / 119

GENUINE SUZUKI ACCESSORIES
9/20
6. Apply grip cement to the han-
dlebar surface. Insert the Grip
Heater (L)
1
into the handlebar
at a stroke before the grip
cement dries.
As shown in the illustration,
align the line on the Grip Heater
(L)
1
with the arrow on the TC
selector switch.
H a ndle ba r
Grip cement
NOTICE
• When the grip is inserted,
do not stop in midway but
insert it at a stroke.
• When inserting it, do not hit
the grip end with a hammer
or twist it forcibly, the grip
heater may be cut off.
• When the grip cannot be
inserted in midway, pull out
the grip by pouring the
degreasing agent into a gap
between the grip heater and
the handlebar. At this time,
do not twist forcibly the
heater wire with a screw-
driver or such similar tool,
the heater wire inside the
grip heater may be cut off.
Line
Line
Left h a ndle ba r s witch b ox
B'/B0B*ULSBKHDWHUB(1*IP࣮࣌ࢪ㸰㸮㸯㸷ᖺ㸯㸮᭶㸱㸯᪥ࠉᮌ᭙᪥ࠉ༗๓㸷᫬㸲㸷ศ