Suzuki 57100-0682 Series, Installation Instructions Manual, Page: 19 / 119

GENUINE SUZUKI ACCESSORIES
19/20
The grip heater temperature can be adjusted in three steps by pushing
the switch. Pushing the switch changes temperature as follows:
NOTE:
•
The grip heater has a built-in automatic switch to avoid unnecessary
battery power consumption. The automatic switch turns off grip
heater when the engine speed becomes lower at engine idling speed.
When the engine speed increases and the battery voltage increases,
the automatic switch turns on grip heater and the indicator comes
back.
• Pushing the switch will not turn on the grip heater when the engine
speed is low. Increase the engine speed and push the switch again to
turn on the grip heater.
8
CAUTION
Do not use the grip heater, when air temperature is above 20 degrees
to avoid burns due to overheating.
• Be sure to wear gloves to avoid burns.
• Replace the damaged grips to avoid burns or electrical shock.
OFF LEVEL3
MAX
LEVEL2 LEVEL1
MIN
3 times blink
7 times repeat
Lighting
2 times blink
7 times repeat
Lighting
1 time blink
7 times repeat
Lighting
B'/B0B*ULSBKHDWHUB(1*IP࣮࣌ࢪ㸰㸮㸯㸷ᖺ㸯㸮᭶㸱㸯᪥ࠉᮌ᭙᪥ࠉ༗๓㸷᫬㸲㸷ศ