Suzuki 2010 Grand Vitara Owner'S Manual Download Page 297

Page: 297 / 337

7-48

INSPECTION AND MAINTENANCE

79K21-03E

For rear wipers:

80G146

1) Hold the wiper arm away from the win-

dow.

2) Remove the wiper frame from the arm

as shown.

3) Slide the blade out as shown.

65D151

NOTE:
Do not flex the wiper blade frame end more
than necessary. If you do, it can break off.

54G135

(1) Retainer

4) If the new blade is provided without the

two metal retainers, move them from
the old blade to the new one.

5) Install the new blade in the reverse

order of removal.
Make sure the blade is properly
retained by all the hooks.

6) Reinstall wiper frame to arm in the

reverse order of removal.

Summary of Contents for 2010 Grand Vitara


















































































































































































































































































































































Search results

Summary of Contents for 2010 Grand Vitara

Reviews:

Related manuals for 2010 Grand Vitara

Brands by name

Popular brands

Suzuki 2010 Grand Vitara, Owner'S Manual

Search results

Summary of Contents for 2010 Grand Vitara

Reviews:

Related manuals for 2010 Grand Vitara

Brands by name

Popular brands