![background image](http://html1.mh-extra.com/html/suzohapp/bill-to-bill-xt/bill-to-bill-xt_operation-manual_1408244041.webp)
- 41 -
© 2015 Suzo-Happ
9.
Wait until the validator has finished initialisation.
10.
Observe the LED turn green.
11.
Power down the validator.
12.
Turn the Dip SW 4 to COMMUNICATION mode.
13.
Remove the validating head.
14.
Remove the memory card.
15.
Install the validating head.
16.
Power on the validator.
The card can be used to update more units.
6.2.
Update from Host Machine
This method is suited to update Bill-to-Bill™XT when the host machines are connected to
a network. The software file is sent to the host machine over the network and
downloaded to the device utilising CCNET protocol.
A special memory card called ‘Network Download Enable’ must be installed in the
devices. This card enables the Bill-to-Bill™XT to accept CCNET download instructions.
This functionality must be implemented by the host controller as described in CCNET
protocol description d2. Please consult with your sales representative for further
information.