ELECTRIC BICYCLE METER KT—LCD5 Product User Manual
- 14 -
When the electronic control system of the electric vehicle fails, and the meter will
automatically display (flicker) fault code. You can’t exit the fault code display only the
fault is removed.
Error Code Display
Error Code & Definition Table
：
Error Code
Definition
01
＿
info
Throttle Abnormality
03
＿
info
Motor Hall Signal Abnormality
04
＿
info
Torque sensor Signal Abnormality
05
＿
info
Axis speed sensor Abnormality(only applied to torque sensor )
06
＿
info
Motor or controller has short circuit Abnormality
User Setting Project
KT-LCD3 meter user setting project
：
◇
General project setting
◇
P parameter setting
◇
C parameter setting
General Project Setting
○
Maximum Trip Speed
Under power off status, hold
button long
(SW)
, the meter is turned on. Within
5 seconds after boot-up, hold
button
(UP)
and
button
(DOWN)
simultaneously for about 2 seconds, the first is to enter the maximum riding speed setting
