RING SCANNER
QUICK REFERENCE GUIDE
8
» Only use clean water as a cleanser
CE Mark
FCC
Mark
8. Code settings
Common bar code is used to refer to the setting of the bar code scanning, the new
set of commands to be executed.
8.1 Scan bar code "Device information" will be the serial number, version of the
feedback device, and the current Bluetooth version information when the normal
connection is connected.
8.2 Scanning the Reset Scanner barcode can restore the scanner to the factory
default settings
You may need to reset your scanner when:
scanner is not properly configured so that it fails to decode barcodes;
you forget previous configuration and want to avoid its impact;
functions that are rarely used have been enabled for the time being.
