RING SCANNER
QUICK REFERENCE GUIDE
9
8.3 Scan bar code "Restore Bluetooth" only to restore the name of the Bluetooth, has
set the way of scanning and other settings will not change.
8.4 Scanning bar code "Continuous scanning", continuous touch case to maintain a
long light state, can achieve rapid scanning of bar code. If you need to restore the
normal state of the scan, scan the "manual trigger scan" bar code.
8.5 Manual Mode (default): A trigger pull activates a decode session. The decode
session continues until the barcode is decoded or you release the trigger or the
decode session timeout occurs.
8.6 Scan bar code " Automatic interval scanning ", after the successful scanning of
the bar code according to the set time (0.5 ~ 3 seconds and the default is 2 seconds)
the device will automatically light.
8.7 Scan bar code " Automatic interval scanning-reduce ", in the case of automatic
intermittent continuous scanning for adjustment of the scan time, scan time interval
of 0.5 seconds, the fastest to 0.5 per second.
