Suunto X6HR, Instruction Manual

Page: 43 / 70

41
press Start . Differ is always in the measuring mode, i.e. it measures the time and
altitude difference constantly but displays them only when you select the function.
Both hours and minutes are displayed during the first 10 hours. During the next 89
hours, only hours are displayed. Finally, the display shows only a dash and letter ‘h’.
• Time/Heart Rate: Displays the current time. If the heart rate monitor is receiving a
heart rate signal, this row displays the heart rate instead of time.
3.5.2. Logbook
The logbook allows you to save information regarding, for example, a hiking trip. When
you start the logbook, it starts gathering information about the cumulative ascents and
descents, average ascent and descent rates, highest and lowest points, heart rate and
specific marks you can set during the trip. Logbook information is updated in 10-sec-
ond intervals. When you stop the logbook, the information gathered thus far is saved
as a logbook file that can be viewed later. The maximum duration of one logbook is 168
hours (one week). After this, the logbook stops automatically. Suunto X6
HR
can store
20 logbook files at one time. More logbooks can be saved on your PC with the help of
the PC Interface. For more information, see page 56.
NOTE: To record a complete graph of the activity, use the stopwatch in the Chrono
mode.
Starting the logbook
To start the logbook:
1. In the Function menu, scroll to
Logbook with the arrow buttons and press Suunto .
2. Scroll to Start and press Suunto .
If the logbook is not running and there is enough memory left, recording begins.
The message “
LOGBOOK STARTED
” is displayed and you return to the Function menu.