70
The dive time is displayed in 20 second increments with each display being shown
for about three seconds. The depths shown are the maximum values of each inter-
val.
After the last depth figure of the selected profile ( Fig. 6.8), the Spyder automati-
cally returns to Display I of the same dive in the Logbook. If desired, the profile of
the same dive can be recalled again following the above procedure.
The scrolling of the profile can be stopped by pressing any button.
Press
to stop the scrolling and to return to Display I
of the
same dive
in the Logbook.
Press
to stop the scrolling and to change to Display I
of the
next dive
in the Logbook.
Press
to stop the scrolling and to change to Display I
of the
previous dive
in the Logbook.
Press
to stop the scrolling and to return to the beginning of the Logbook.
Press
two (2) times to exit the Logbook Memory [LOG] and enter the
Memory Mode [MEM].
NOTE: Several repetitive dives are considered to belong to the same repetitive
dive series if the no-flying time has not ended. See Dive Numbering in section
4.4.1 for further information.
