Suunto Spartan, User Manual

Page: 28 / 46

28
• field 3 displays the text “dSC” along with the text “log Book” to the left.
the fourth display shows the number of laps (runs; either ascents or descents) completed for the particular
logbook that is being viewed (fig. 15).
field 2 displays the total number of ascents or descents ; and
field 3 displays the text “laP” along with the text “log Book” to the left.
Note: A Lap is a vertical movement either ascent or descent equaling 150 ft (50 meters) or above.
The fifth display shows the time duration of recording information in the particular logbook that is being viewed
(fig. 16).
• field 2 displays the total time of the log ; and
• field 3 displays the text “dUr” along with the text “log Book” to the left.
Note: If the logbook is recording, based on the interval chosen the logbook will record up to that particular time
period. Once the time period has been reached the Wristop Computer, will alert the user that the logbook recording
has expired (known as a timeout). For setting the logbook interval refer to Setting the Altimeter on Page 24.
the timeouts are as follows:
Logbook intervals Maximum recording time
20 second 10 hours
1 minute 12 hours
10 minute 7 days
60 minute 10 days
3.4.1. how to start and stop a logbook
logbook recording starts by pressing the [+] button twice within 2 seconds. logbook recording stops by pressing
the [+] button twice as well within 2 seconds.
Note: In order to prevent accidental starts/stops of a logbook, the Spartan should be in another function other
than the altimeter mode. If the logbook is activated the logbook will continue to recorded even if the Spartan
is in another mode.