29
2. Connect the ON/PLAN and COM contacts until a beep is heard and all three
altitude/ personal adjustment modes appear. Release your fingers immediately at
this point. The current mode is now blinking. Wait at least two seconds but not more
than four seconds before the next step.
3. Connect again the ON/PLAN and COM contacts until the blinking altitude/
personal adjustment mode starts to scroll. Release your fingers when the desired
mode is blinking. Wait at least two seconds but no more than four seconds before
next step.
4. Connect the TIME/MODE and COM contacts to confirm this new altitude/
personal adjustment mode. A beep is heard, the blinking will stop and the other
mode indicators will disappear.
5. The process is ended by the RETURN command, i.e. by connecting all three
contacts at the same time. A double beep is heard and the SOLUTION
á
will return
to the surface mode.
WARNING!
ALWAYS RECHECK THE ALTITUDE/ PERSONAL ADJUSTMENT SETTING TO
ENSURE THAT IT IS NOT SET FOR AN ALTITUDE LESS THAN THAT OF THE
DIVE SITE!
4.4 DIVE SIMULATOR
The simulation mode can be used to plan dives in advance, for demonstrational or
educational purposes, or just for pleasure. The SOLUTION
á
has complete dive
simulating capabilities, including repetitive dives. The simulator can also be used
between dives. The simulator will take into consideration the nitrogen loading from
previous dives and modify the no-decompression times accordingly.
The dive simulator is activated using the menu selection. Lift your fingers when dSI
is displayed. When in simulation mode, the depth is controlled using the three water
contacts. This has been described in detail in Section 2.3, "The Dive Simulator - For
Easy Learning".
4.5 SETTING TIME AND DATE
The current date and time is read by connecting the TIME/MODE and COM contacts
for about one second, as described in Section 3.2.3, "Calendar Clock Function".
