Suunto N3, Instruction Manual

Page: 21 / 43

19
4.1 CHARGING THE BATTERY
If your Suunto n3 has a remaining battery charge of 30% or less, you should charge it
as soon as possible. Charging the Suunto n3 takes up to 5 hours.
To charge your Suunto n3:
1. Connect the USB cable to the adapter. Plug the adapter into an electrical outlet.
2. Connect the USB cable’s data snake to your Suunto n3.
3. Wait for the Suunto n3 to fully charge. The message “C
HARGED
” is displayed when
the battery is fully charged.
Warning: Your Suunto n3 contains a Li-ion battery. To reduce the risk of fire or burns,
do not disassemble, crush, puncture, short external contacts, or dispose of in fire or
Battery charge remaining Suunto n3 response
30%
The low battery indicator ( ) appears.
20%
A notification message appears. Suunto n3 goes
into the low battery mode. The radio turns off and
stops receiving new information. Suunto n3
switches to the Time channel after 5 minutes. The
watch face may switch to one that uses less
battery power.
10%
Suunto n3 shuts down and the screen goes blank.
Suunto n3 conserves the contents of its memory.