Suunto N3, Instruction Manual

Page: 17 / 43

15
4. Press STARTSTOP/LIGHT to start the Chronograph.
Minutes, seconds and tenths of the second appear as large numbers. After one
hour, tenths of the second stop appearing on the display (but are still measured as
such).
5. To store lap/split times, press NEXT/LAP.
6. Press STARTSTOP/LIGHT to stop the Chronograph.
7. Scroll the stored lap/split times with NEXT/LAP. You can identify the last lap/split
time by the text “E
ND
” on the right upper corner of the display.
8. To reset the Chronograph display, long press NEXT/LAP. Before resetting the
Chronograph, you can restart it by pressing STARTSTOP/LIGHT. It continues
measuring the time from the point when it was previously stopped.
3.5 TIMERS
Suunto n3 has three different training timers that you can use alongside the
Chronograph. For example, you can use these versatile timers for countdown time
measurement before the start of a competition, for work and rest intervals in circuit
training or to automatically start the Chronograph after a warm-up period. Different
timers function differently according to their type and purpose.
• Timer-Stop starts the set countdown time when activated
and stops it after the time has run out.
• Timer-Chrono starts the set countdown time when
activated and automatically starts the Chronograph after
the time has run out.