3
2.3. ACTIVATING THE POD
Press and hold the Start/Stop button until the LEDs start to blink.
=> To deactivate, press and hold the button until the LED lights disappear.
2.4. CONNECTING THE POD WITH THE WRISTOP
Every time the POD is activated or the connection has been lost, you need to reconnect the
POD with the wristop.
• Select SPD/DST > CONNECT in your Suunto wristop menu.
=> If ‘NO DEVICES FOUND’ is displayed, check the battery power indicator: if
the red LED is on, the connection may not succeed. Replace the batteries and try again.
If the POD does not receive a signal from the wristop for 5 minutes, or if it does not receive
a satellite signal for 15 minutes, it will turn off automatically.
2.5. REPLACING THE BATTERY
1. Turn the bottom cover slightly left (counterclockwise) and detach it from the top cover.
2. Replace the AAA size (LR03) batteries, set the bottom cover over the top cover and
close the POD by turning the bottom cover right (clockwise).
2.6. SUUNTO TRAINING MANAGER
You can transfer the speed and distance data recorded by your wristop to your computer to
be viewed in the Suunto Training Manager.
Summary of Contents for GPS POD
Page 1: ......