background image

8

•  In shallow water, the sun’s direction can be seen from shadows on the bottom, or by looking 

towards the surface

•  Swimming in a straight line along the bottom is greatly facilitated if you can line up three 

distinctive objects in your line of vision. As you reach the fi rst one, line up a new one farther 
away, so that you again have three points determining your course. This way you can coun-
teract the effects of side current.

Compass Balancing

The horizontal and vertical components of earth’s magnetic fi eld vary considerably in different 
locations. For this reason Suunto compasses are balanced for 5 different zones. If the compass 
is used in an adjacent balancing zone the compass needle will tilt only slightly. However, the 
farther the compass is used from it’s intended zone, the more the needle will tilt. In extreme 
situations the needle might stick. For this reason it is very important to know in which country 
the compass will be used.

Compass zone map

SUUNTO Mechanical Gauges

Suunto depth gauge SM-16
Models available: 45 m, 70 m, 150 ft, 230 ft

Suunto pressure gauge SM-26
Models available: 200bar

Suunto pressure gauge SM-36
Models available: 300bar and 4000psi

1

2

3

4

5

Summary of Contents for CB-71













Reviews: