Suunto Ambit 2.0 User Manual Download

Page: 88 / 118

Tones/display

●

Invert display: inverts the display

●

Tones:

○

All on: button tones and system tones are activated

○

Buttons Off: only system tones are activated

○

All off: all tones are off

NOTE:

The alarm will sound even when all tones are off.

●

Backlight
Mode:

○

Normal: The backlight is switched on for a few seconds when you press
[Light Lock] and when the alarm sounds.

○

Off: The backlight is not switched on by pressing a button or when the
alarm sounds.

○

Night: The backlight is switched on for a few seconds when you press
any button and when the alarm sounds. Using the Night mode
significantly reduces battery duration.

○

Toggle: The backlight is switched on when you press [Light Lock]. It
stays on until you press [Light Lock] again.

Brightness: Adjust backlight brightness (in percentages).

●

Display contrast: Adjust the display contrast (in percentages).

Compass

●

Calibration: Start compass calibration.

●

Declination: Set the compass declination value.

Map

●

Orientation

Summary of Contents for Ambit 2.0























































































































Search results

Summary of Contents for Ambit 2.0

Reviews:

Related manuals for Ambit 2.0

Brands by name

Popular brands

Suunto Ambit 2.0, User Manual

Search results

Summary of Contents for Ambit 2.0

Reviews:

Related manuals for Ambit 2.0

Brands by name

Popular brands