APPLICATION NOTE
TELULAR SX5 SERIES PHONE CELL & XPERT2/9210B SPEECH MODEM (OR 8210-3014 MODEM)
14
Once in the graphical setup window click on the +Add tab. The following menu will
appear:
Figure 13. Graphical Setup window
Add an input followed by a Measure block followed by a Log block and finally connect
a telemetry block (Coms Tag). Each block can be added one at a time or all at once
using the Setup Wizard as shown below. The setup wizard is useful if several sensors
with the same processing sequence are being added.
Figure 14. Use of Setup Wizard
The example setup is displayed below showing an AT/RH sensor as the input,
connected to a measure block, followed by a log, with a ComsTag as the final block.
