TELULAR PHONECELL WITH THE 8210 SPEECH MODEM
9
The Dial-In message shown above is one of the “canned” reports that will speak the name and
value of the last measured value of each sensor enabled for “current data” (see Section 6.2 below).
Users can create a message using a vocabulary string. An example shown below uses a Speech
Modem string to speak the following message:
Welcome to the Sutron 82 10
182
2 :173 :170
82 10
Figure 4 Example Speech Modem Vocabulary String
The 8210 can be setup to Dial-Out and make voice reports of alarm conditions. This would be
enabled by setting the Dial-Out Enable to
ON
, at least one phone number, and establishing a Dial-
out Message string.
(Complete details for using the 8210 vocabulary are presented in the Modem Setup section of
Chapter 4 of the
8210 Operators Manual
.)
