TNB060
Treetops Seesaw
Installation Instructions
1 Check using the Parts List that none of the components are missing.
2 Plan the final position of the play equipment ensuring there is sufficient space.
3 Excavate the foundation holes in accordance with the plan.
4 Sort and identify parts before assembly.
5 Assemble the rubber bumps stops onto their ground fixings as shown in this document.
6 Place the bump stop ground fixings and the main seesaw ground fixing in their foundation
holes and fill with concrete. Ensure ground fixings are level and at the correct depth with
regard to the finished play level after surfacing.
7 When the concrete has set (2 - 3 days), fit the top seesaw assembly.
8 Tighten all fixing bolts.
9 Do not allow the equipment to be used until the concrete has completely set and the
required safety surfacing has been installed.
10 Follow the maintenance instructions supplied.
NB
During installation care must be taken to prevent hazards to children.
Extra care should be taken if conditions are abnormal.
Page 2
Rev 00
