background image

Kit includes:

A  1  Welded screw eye
B  4  Pigtail lag screws
C  1 Shackle
D  4 Pulleys
E  2  Webbing straps with buckles 

 

  7' (2.13 m) 

F  1  Single black/yellow hoisting rope
G  1  Block and tackle with  

 

  cleat (G1) and rope

H  4  Black drop ropes: 2 long, 2 short

2  Lag bolts 1/4" x 2-1/2"  

 

  (6 x 63 mm)

J  2  Washers 1/4" (6 mm)
K  2  Organizer plates
L  2  Organizer pulleys

Purchase separately (if needed)
 

2  Pine boards (grade 2) 2" x 6" x 6'  

 

  (50 mm x 152 mm x 1.83 m)

 

8  Lag bolts and washers  

 

  5/16" x 4" (8 x 100 mm)

save time!  Read the entiRe manual befoRe beginning hoisteR installation.

imPoRtant safety infoRmation

• NEVER USE TO LIFT A PERSON.

• DISAbLE AUTOmATIc gARAgE DOOR OPENER 

 when installing, raising, or lowering Hoister.

• READ ENTIRE mANUAL cAREFULLy bEFORE 

 starting installation. It will save you time.

• DO NOT UNTIE ANy ROPES 

System comes ready to install.  

Leave F, g and H together. 

• DO NOT RAISE OR LOWER HOISTER 

 with anyone standing under boat.

Tools Needed:
Drill
Drill bits: 5/32" (4 mm), 7/32" (6 mm), 5/16" (8 mm)
Plumb line
Pencil
Stud finder
Stepladder
Safety glasses
Tape measure
Wrench: 7/16" (11 mm) box end or ratcheting wrench

*Note:

 (G) Block and Tackle varies by system size. Refer to Hoister part number for specific  

 

cleat style.

(D) Pulleys

(A) 

Welded 

screw 

eye

(B) Pigtail lag screws

(I)  Lag bolts 

1

/

4

" x 2

1

/

2

"  

  (6 mm x 63 mm)

(L) Organizer pulleys

(K) Organizer plates

(G) Block and tackle*

(E) Webbing straps with buckles 

  7' (2.13 m)

(F) Single black/yellow hoisting  

  rope (DO NOT untie)

(J) Washers 

 

1

/

4

" (6 mm)

(C) Shackle

(G1) 

Cleat

(H) Drop  black   

  ropes (DO  

  NOT untie)

7806

7803bSZ

7802bSZ

Rope Organizer Components

7801bSZ

WARNINg! Strictly follow all instructions to avoid an accident, damage to property,  
personal injury or death.
WARNINg! This product is not to be used for human suspension. components may fail  

causing person to fall, possibly resulting in serious injury or death.

Suspenz

®

 8725 Roswell Road, Suite O-220, Atlanta, gA USA 30350 

 Tel: 866-SUSPENZ or 770-518-0045 

 Email: [email protected] 

 Web: www.Suspenz.com

7801bSZ: 60 (27 kg) System

7802bSZ: 90 (41 kg) System

7803bSZ: 145 (66 kg) System

7806bSZ: 200 (91 kg)System

Summary of Contents for 7801BSZ













Reviews: