Design and function
FixFrame – Assembly Instructions
Page 16
Figure 7 M8 x 35 mm countersunk bolt – pos. F
Figure 8 M10 x 20 mm adjustable glide – pos. G
The cross beams (pos. A) and the fixing plates (pos. B) are fastened to the lifting columns using
screws.
The foot base-Q (pos. C) foot base-RE (pos. D) are screwed to the bottom end of the lifting column.
The tabletop is screwed together with the cross beams (pos. A) and the fixing plates (pos. B).
4.2.1
Packaging units and weights
The complete table frame is combined into one packaging unit for individual acceptances. Therefore,
the total weight of the packaging unit depends on the configuration of the table frame. The total
weight of the packaging unit amounts up to 18 kg here, depending on the variant.
IMPORTANT
When handling the packaging units, observe the respective weights of type FixFrame
tabletops. In particular, adhere to applicable regulations, provisions and laws regarding the lifting and
carrying of loads.
