Design and function
FixFrame – Assembly Instructions
Page 13
4
Design and function
4.1
Technical specifications
Technical specifications - Table frame
Frame section dimensions (for the installation on tabletops)
Length
Cross beam – pos. A :
1133 mm 1333 mm 1533 mm 1733
mm
1933
mm
Fixing plate – pos. B :
545 mm 545 mm
545 mm 545 mm 545 mm
Length x width
Suitable for tabletops:
1200 mm 1400 mm 1600 mm 1800
mm
2000
mm
800 mm 800 mm
800 mm 800 mm 800 mm
Foot base Q dimensions (to be attached to ELS3 lifting column) – pos. C
Length:
750 mm
Width :
90 mm
Height:
20 mm
Hole pattern:
Round, section circle: 45 mm, borehole: 9 mm
Foot base RE dimensions (to be attached to ELS3 lifting column) – pos. D
Length:
750 mm
Width :
90 mm
Height:
20 mm
Hole pattern:
Rectangular, 50 mm x 22 mm, borehole: 9 mm
Installation kit – pos. E, F and G
Countersunk bolt – pos. E :
M8 x 35 mm
Raised head screw –
pos F:
M6 x 10 mm
Adjustable glide – pos. G :
M10 x 20 mm, diameter 63 mm
Table 5 Technical specifications
IMPORTANT
The dimensions of the tabletop must not protrude over the installed frame by more
than 100 mm on the longitudinal side and 130 mm on the narrow side.
