SiO Controller
SUS Corporation
3-5
3.1.5
SiOt
No.
Part
Function
(1)
Power connector
Connect an AC adapter here to supply DC 24 V.
* Do not supply power from other connectors.
(2)
Power LED (white)
Lights when the power is ON
(3)
RUN switch
Set this to RUN (right) to execute the program.
(4)
RUN LED (blue)
Lights during RUN
(5)
Input connectors
A connector used for input (e-CON (4-pole) x 4 inputs)
(6)
Output connectors
A connector used for output (e-CON (3-pole) x 2 outputs)
(7)
IN LED (red)
Lights when the input signal is ON (IN 1 to 4)
(8)
OUT LED (green)
Lights when the output signal is ON (OUT 1 to 2)
(9)
USB connector
Connect the USB cable here (Micro-B
USB2.0)
(10)
Ethernet connector
Connect the Ethernet device
(11)
Ethernet. Connection
LED(green)
Light when a device is Ethernet connected
(12)
Ethernet. Communication
LED(yellow)
Lights during Ethernet communication.
(13)
ALM LED
Does not use.
(14)
Ground terminal
Connect this to the earth using a M3x4 screw.
(15)
GF mount hook
A hook for installation on a GF (N) rail.
(2)
(3)
(4)
(5)
(6)
Version label
(1)
(11)
(12)
(7)
(8)
(9)
(10)
(13)
(14)
(15)